Tape Rewinding Machine

Tape Rewinding Machine

High Speed Laminating Hot Melt Coating Machine mainly used in pressure sensitive adhesive coating, such as self-adhesive label, heat sensitive label, adhesive tapes, advertisement inkjet material, etc.

Tape Rewinding Machine

Tape Making Machine

Operational management regulations
1. Each tape machine head is provided with a recording box, a tape machine inspection record, a tape machine protection experiment record, etc.;
2. In time, clean the floating coal under the belt conveyor. If there is water, set the pump according to the requirements. When there is water on the belt or above the frame, the flow prevention measures must be taken;
3. The legs of the tape rack must be set perpendicular to the floor. The transition section should be set between the nose section and the ordinary shelf. When the height of the roadway is ups and downs, the method of raising the height or raising the legs should be adopted to ensure that all the legs are firm. Force; 
4. All the rollers, connecting pins or clips of the belt conveyor must be complete and installed in place to ensure the rotation of the rollers is flexible, without the shaft, falling, missing and so on;
5. When the belt conveyor is out of deviation, it must be adjusted immediately. The belt machine is not allowed to have wires, steel pipes and other debris under the surface of the belt and within 50cm. The top hanging object above the belt or the support frame above the belt conveyor must be firm and reliable.

Tape Rewinding Machine

Tape Making Machine

 

Article 1

At least one iron remover shall be installed in the main transport system (large lane, main well and upper warehouse belt conveyor), and the iron separator shall be installed at the joint of the fully integrated belt conveyor and the belt conveyor.
1. The magnetic field strength of the iron separator installed in the continuous mining working face belt machine is not less than 1200 GS; the magnetic field strength of the iron separator installed in the fully mechanized mining belt conveyor and the main transportation system (large lane, main shaft and upper warehouse belt) is not less than 1500 GS. The upper roller and the upper roller frame must not be installed directly under the iron remover.
2. Each district team should contact the coal quality department every quarter to perform a magnetic field strength test on the used iron remover. When the measured magnetic field strength is less than 70% of the designed magnetic field strength, it must be replaced.
3. The iron separator implements the charter management system. Each iron remover must have a charter responsibility card. The liability card must specify the equipment status, charter owner and related technical parameters.
4. A glove box must be set within 5 meters of each iron remover. The iron remover should be started and stopped at the same time as the belt conveyor. After the shutdown, the debris adsorbed on the iron remover should be cleaned up in time.
5. The installation and management of the iron remover shall be carried out in accordance with the “Administrative Measures for Iron Removal of Shendong Coal Branch (Trial)”.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com