Tape Cutting Machine Automatic

Tape Cutting Machine Automatic

High Speed Laminating Hot Melt Coating Machine mainly used in pressure sensitive adhesive coating, such as self-adhesive label, heat sensitive label, adhesive tapes, advertisement inkjet material, etc.

Tape Cutting Machine Automatic

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.


4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;

5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.

Tape Cutting Machine Automatic

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com