Scotch Tape Machine

Scotch Tape Machine

Function:  packaging tape machine producing clear & color & printed packing tapes.

Scotch Tape Machine

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;

 

Scotch Tape Machine

Tape Making Machien

 

Protection management regulations:

Locking line hanging requirements:
1. All tape machine locking lines must be hung with special lifting rings. The spacing between the lifting rings is 3 meters. It is strictly forbidden to share the same cable hook with other cables. It is strictly forbidden to tie the locking wires directly to the belt frame or to the ground.
2. The height of the tape machine lock and lock line should not exceed 1.5 meters from the ground. The lock line of the drive section of the fully mechanized mining belt conveyor to the unloading section and the cross-row section of the continuous belt conveyor can be laid along the shelf, but at least in this section. Place the latching drawstring 2 evenly.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com