Pvc Tape Packing Machine

Pvc Tape Packing Machine

Spiral paper core making machine / Paper tube bobbin coiling machine for adhesive tapes.

Pvc Tape Packing Machine

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.


4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;

5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.

Pvc Tape Packing Machine

Tape Making Machien

 

Protection management regulations:

Locking line hanging requirements:
1. All tape machine locking lines must be hung with special lifting rings. The spacing between the lifting rings is 3 meters. It is strictly forbidden to share the same cable hook with other cables. It is strictly forbidden to tie the locking wires directly to the belt frame or to the ground.
2. The height of the tape machine lock and lock line should not exceed 1.5 meters from the ground. The lock line of the drive section of the fully mechanized mining belt conveyor to the unloading section and the cross-row section of the continuous belt conveyor can be laid along the shelf, but at least in this section. Place the latching drawstring 2 evenly.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com