Tape Application Machine

Tape Application Machine

This Self Scotch Tape Making Machine is a combination of printing ,coating, drying and slitting, it can  make all kinds of sizes of clear tapes, printed tapes and color tapes.It is highly automatic, operates easily .

Tape Application Machine

Tape Making Machine

Operational management regulations
1. Each tape machine head is provided with a recording box, a tape machine inspection record, a tape machine protection experiment record, etc.;
2. In time, clean the floating coal under the belt conveyor. If there is water, set the pump according to the requirements. When there is water on the belt or above the frame, the flow prevention measures must be taken;
3. The legs of the tape rack must be set perpendicular to the floor. The transition section should be set between the nose section and the ordinary shelf. When the height of the roadway is ups and downs, the method of raising the height or raising the legs should be adopted to ensure that all the legs are firm. Force; 
4. All the rollers, connecting pins or clips of the belt conveyor must be complete and installed in place to ensure the rotation of the rollers is flexible, without the shaft, falling, missing and so on;
5. When the belt conveyor is out of deviation, it must be adjusted immediately. The belt machine is not allowed to have wires, steel pipes and other debris under the surface of the belt and within 50cm. The top hanging object above the belt or the support frame above the belt conveyor must be firm and reliable.

Tape Application Machine

Tape Making Machine

Article 5
In order to facilitate the maintenance and repair of the equipment, a pedestrian crossing bridge is set every 300 meters when the belt conveyor transport length exceeds 300 meters. In case of special circumstances, additional bridges must be added. The bridge setting must meet the following requirements.
1. Handrails must be provided on both sides of the top of the bridge. The height of the handrail is not less than 700mm. When the height of the bridge deck is greater than 1700mm, the ladders on both sides of the bridge should be set with handrails of not less than 500mm.
2. The effective width of the pedestrian passage of the bridge is not less than 600mm.
3. The distance from the bottom of the bridge to the center of the upper deck is not less than 600mm. The belt conveyor of 1m or more is not less than 800mm, but it is necessary to ensure the large coal and vermiculite pass smoothly according to the actual situation on site.
4. The four legs of the bridge and the roadway floor must be fixed firmly. At the same time, it must be fixed firmly with the belt machine frame. When installing the bridge in the inclined roadway, there must be a reliable anti-fall device.
5. The pedals of the bridge should be made of patterned steel plates or take anti-slip measures.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com