Insulation Tape Machine

Insulation Tape Machine

This Self Scotch Tape Making Machine is a combination of printing ,coating, drying and slitting, it can  make all kinds of sizes of clear tapes, printed tapes and color tapes.It is highly automatic, operates easily .

Insulation Tape Machine

Tape Making Machien

 

Protection management regulations:

First
The tape machine protection must be complete, intact, sensitive and reliable, and the settings meet the following requirements.

1, fully mechanized mining, centralized transportation, main transportation, loading and unloading tape machine must be installed anti-skid, coal, deviation, tension, tear-proof, cable emergency stop, chain, smoke alarm and over-temperature automatic sprinkler, main transportation The belt conveyor on the lane must also be equipped with anti-reverse and braking devices; the lower belt conveyor must be equipped with a brake device.
2. After the continuous mining and comprehensive excavation, the supporting tape machine must be equipped with anti-skid, coal-filling, deviation, cable emergency stop and interlocking device.
3, the transport tape machine must also be equipped with anti-reverse; the lower belt conveyor must be equipped with a brake device.

Insulation Tape Machine

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com