Opp Tape Cutting Machine

Opp Tape Cutting Machine

1.1. Used to produce BOPP packing tape;

1.2. Suitable material: 

1.2.1. Base material: BOPP film (0.023-0.032mm) ;

1.2.2. Glue: acrylic acid glue, solid content no less than 55%, viscosity: 150~200CPS.

Opp Tape Cutting Machine

Tape Making Machine

 

Production debugging:
1 According to the requirements of the process sheet, the base material of the bag to be bagged is installed at the center of the loading shaft by a hydraulic vehicle, and the air-expansion shaft is inflated with a pneumatic gun. Start the air pressure lifting device to place the substrate in the appropriate discharge position. Check the roll substrate for product defects and strips. If it is necessary to keep in mind the joint position, in order to eliminate defective products during the bag making process.

2 Correctly dressing.


3 After the material is finished, the heat-sealing tool that meets the product requirements can be replaced according to the requirements of the process.


4 Turn on the main power, cooling water, static elimination device and compressed air source. According to the process requirements, set the appropriate temperature of the corresponding heat sealing knife through the operation interface.

5 Set the discharge tension air pressure and put it into automatic.


6 Through the spot button, the material is sent to the cut position required by the process sheet, and the length of the bag is adjusted to track the sensitivity of the electric eye. If punching is required, adjust the position of the rounded hole and the tearing opening.


7 Through the man-machine interface, set the bag size according to the requirements of the process sheet, the bag feeding speed, the quantity of finished products and the sealing ratio

Opp Tape Cutting Machine

Tape Making Machine

 

Article 6
All steel plates in the guide trough must be numbered. The number of the steel plates must be welded by electric welding. The steel plates on the continuous mining system must also be equipped with protective chain ropes to prevent the steel plates from falling into the system. The steel plates at the unloading port (conduit port) of the fully mechanized Martil (transfer machine) and the discharge port of the continuous mining crusher are also required.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com