Machine For Printing Adhesive Tape

Machine For Printing Adhesive Tape

1.1. Used to produce BOPP packing tape;

1.2. Suitable material: 

1.2.1. Base material: BOPP film (0.023-0.032mm) ;

1.2.2. Glue: acrylic acid glue, solid content no less than 55%, viscosity: 150~200CPS.

Machine For Printing Adhesive Tape

Tape Making Machine

 

Start production
1 After everything is ready, start the device and start making bags.
2 For the first batch of equipment, the product should be inspected for the length error of the finished bag, the heat seal strength, and the detection that may affect the quality of the product.
3 Put the qualified products into the finished box, and put the certificate on the outside of the finished box, then seal it into the warehouse with tape.
4 When the machine is in operation, always pay attention to changes in equipment, such as temperature and pressure. And clean the surface of the equipment at any time. It is strictly forbidden to stack the waste anywhere. 30 minutes before leaving work, the assistant will clean the equipment around, otherwise the successor will not take over.
5 Equipment failure, especially electrical faults, should be promptly reflected to the bag shift monitor, fill out the "equipment failure repair order" and notify the maintenance personnel.

Machine For Printing Adhesive Tape

Tape Making Machine

Article 5
In order to facilitate the maintenance and repair of the equipment, a pedestrian crossing bridge is set every 300 meters when the belt conveyor transport length exceeds 300 meters. In case of special circumstances, additional bridges must be added. The bridge setting must meet the following requirements.
1. Handrails must be provided on both sides of the top of the bridge. The height of the handrail is not less than 700mm. When the height of the bridge deck is greater than 1700mm, the ladders on both sides of the bridge should be set with handrails of not less than 500mm.
2. The effective width of the pedestrian passage of the bridge is not less than 600mm.
3. The distance from the bottom of the bridge to the center of the upper deck is not less than 600mm. The belt conveyor of 1m or more is not less than 800mm, but it is necessary to ensure the large coal and vermiculite pass smoothly according to the actual situation on site.
4. The four legs of the bridge and the roadway floor must be fixed firmly. At the same time, it must be fixed firmly with the belt machine frame. When installing the bridge in the inclined roadway, there must be a reliable anti-fall device.
5. The pedals of the bridge should be made of patterned steel plates or take anti-slip measures.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com