suitable for cutting PVC tape,masking paper tape,double sided tape,kraft tape,conductive foam tape,duck tape,protective film, etc.
1 After everything is ready, start the device and start making bags.
2 For the first batch of equipment, the product should be inspected for the length error of the finished bag, the heat seal strength, and the detection that may affect the quality of the product.
3 Put the qualified products into the finished box, and put the certificate on the outside of the finished box, then seal it into the warehouse with tape.
4 When the machine is in operation, always pay attention to changes in equipment, such as temperature and pressure. And clean the surface of the equipment at any time. It is strictly forbidden to stack the waste anywhere. 30 minutes before leaving work, the assistant will clean the equipment around, otherwise the successor will not take over.
5 Equipment failure, especially electrical faults, should be promptly reflected to the bag shift monitor, fill out the "equipment failure repair order" and notify the maintenance personnel.
Tape Making Machine
All units must carry out number management on the belt joints of the belt conveyor. In addition to the daily inspections, the belts are thoroughly inspected and recorded every week, and problems are found to be dealt with in a timely manner.
All steel wire ropes must be inspected regularly. The inspection is carried out by a special person. The period is one month. After the flaw detection, a flaw detection report must be issued and the bottom is required. The belt conveyor roller inspection company issued the belt conveyor flaw detection. Management Measures (Trial).
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc