Medical Tape Coating Machine

Medical Tape Coating Machine

Make adhesive tapes from raw material to different sizes of small clear & color & printed tapes and jumbo roll on same machine by one step.

Medical Tape Coating Machine

Tape Making Machine

 

Production debugging:
1 According to the requirements of the process sheet, the base material of the bag to be bagged is installed at the center of the loading shaft by a hydraulic vehicle, and the air-expansion shaft is inflated with a pneumatic gun. Start the air pressure lifting device to place the substrate in the appropriate discharge position. Check the roll substrate for product defects and strips. If it is necessary to keep in mind the joint position, in order to eliminate defective products during the bag making process.

2 Correctly dressing.


3 After the material is finished, the heat-sealing tool that meets the product requirements can be replaced according to the requirements of the process.


4 Turn on the main power, cooling water, static elimination device and compressed air source. According to the process requirements, set the appropriate temperature of the corresponding heat sealing knife through the operation interface.

5 Set the discharge tension air pressure and put it into automatic.


6 Through the spot button, the material is sent to the cut position required by the process sheet, and the length of the bag is adjusted to track the sensitivity of the electric eye. If punching is required, adjust the position of the rounded hole and the tearing opening.


7 Through the man-machine interface, set the bag size according to the requirements of the process sheet, the bag feeding speed, the quantity of finished products and the sealing ratio

Medical Tape Coating Machine

Tape Making Machine

Operational management regulations
1. Each tape machine head is provided with a recording box, a tape machine inspection record, a tape machine protection experiment record, etc.;
2. In time, clean the floating coal under the belt conveyor. If there is water, set the pump according to the requirements. When there is water on the belt or above the frame, the flow prevention measures must be taken;
3. The legs of the tape rack must be set perpendicular to the floor. The transition section should be set between the nose section and the ordinary shelf. When the height of the roadway is ups and downs, the method of raising the height or raising the legs should be adopted to ensure that all the legs are firm. Force; 
4. All the rollers, connecting pins or clips of the belt conveyor must be complete and installed in place to ensure the rotation of the rollers is flexible, without the shaft, falling, missing and so on;
5. When the belt conveyor is out of deviation, it must be adjusted immediately. The belt machine is not allowed to have wires, steel pipes and other debris under the surface of the belt and within 50cm. The top hanging object above the belt or the support frame above the belt conveyor must be firm and reliable.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com