Self Adhesive Tape Machine

Self Adhesive Tape Machine

Make adhesive tapes from raw material to different sizes of small clear & color & printed tapes and jumbo roll on same machine by one step.

Self Adhesive Tape Machine

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.


4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;

5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.

Self Adhesive Tape Machine

Tape Making Machien

 

Protection management regulations:

Locking line hanging requirements:

3. When laying the lock line, ensure that the lock line is parallel to the center line of the belt conveyor. When the direction of the lock line needs to be changed in special circumstances, the lock line must be locked at both ends of the lock line. At the same time, the tension of the lock line should be appropriate. The overall balance is between 0.2m and 0.5m. It should not be lapped or folded except for the nose and the tail.
4. The head and tail of the tape machine are limited by the length of the lock line, which can be processed by the coil, but all the excess lock lines must be in one coil, and the end of the coil at the end of the coil or the tail must be less than 10 meters. . At the same time, the rim lock line should be fixed firmly to ensure reliable locking of the adjacent end when pulling the lock line.
5. The locking line of the fully mechanized mining belt conveyor entering the shifting train section is strictly prohibited from being directly bundled with the monorail crane cable.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com