Make adhesive tapes from raw material to different sizes of small clear & color & printed tapes and jumbo roll on same machine by one step.
Tape Making Machien
Protection management regulations：
The tape machine protection installation must meet the following requirements:
6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;
There is no lighting or protective net at the end of the tape machine head, and the fine is 200 yuan.
The iron remover is not set or the iron number is not managed as required, and the fine is 300 yuan. The iron remover is not cleaned in time and is fined 50 yuan each time.
The belt crossing bridge does not meet the above installation standards and is fined 100 yuan.
The team team did not regularly inspect the tape machine or the records were incomplete, and each time the fine was 100 yuan.
The belt conveyor is short of idle rollers or idlers, the shelves are not fixed, and the support is not strong. Each unit is fined 50 yuan.
The belt conveyor hanging, support and fixed connection are not reliable, and each unit is fined 200 yuan.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc