Ptfe Tape Machine

Ptfe Tape Machine

Top selling transparent cello tape slitting machine 

Suitable for the slitting of BOPP, OPP, PE, PET, Aluminium and etc.

Ptfe Tape Machine

Tape Making Machine

 

Start production
1 After everything is ready, start the device and start making bags.
2 For the first batch of equipment, the product should be inspected for the length error of the finished bag, the heat seal strength, and the detection that may affect the quality of the product.
3 Put the qualified products into the finished box, and put the certificate on the outside of the finished box, then seal it into the warehouse with tape.
4 When the machine is in operation, always pay attention to changes in equipment, such as temperature and pressure. And clean the surface of the equipment at any time. It is strictly forbidden to stack the waste anywhere. 30 minutes before leaving work, the assistant will clean the equipment around, otherwise the successor will not take over.
5 Equipment failure, especially electrical faults, should be promptly reflected to the bag shift monitor, fill out the "equipment failure repair order" and notify the maintenance personnel.

Ptfe Tape Machine

Tape Making Machine

Operational management regulations
1. Each tape machine head is provided with a recording box, a tape machine inspection record, a tape machine protection experiment record, etc.;
2. In time, clean the floating coal under the belt conveyor. If there is water, set the pump according to the requirements. When there is water on the belt or above the frame, the flow prevention measures must be taken;
3. The legs of the tape rack must be set perpendicular to the floor. The transition section should be set between the nose section and the ordinary shelf. When the height of the roadway is ups and downs, the method of raising the height or raising the legs should be adopted to ensure that all the legs are firm. Force; 
4. All the rollers, connecting pins or clips of the belt conveyor must be complete and installed in place to ensure the rotation of the rollers is flexible, without the shaft, falling, missing and so on;
5. When the belt conveyor is out of deviation, it must be adjusted immediately. The belt machine is not allowed to have wires, steel pipes and other debris under the surface of the belt and within 50cm. The top hanging object above the belt or the support frame above the belt conveyor must be firm and reliable.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com