Top selling transparent cello tape slitting machine
Suitable for the slitting of BOPP, OPP, PE, PET, Aluminium and etc.
Tape Making Machien
Protection management regulations：
The tape machine protection installation must meet the following requirements:
3. At least one set of anti-running switch shall be installed at the head, middle drive and tail of the belt machine; the delay of the belt machine's deviation switch shall not exceed 2S, and the deviation protection test shall be performed once a week, and the record shall be made; A deviation tester (installation height exceeding 1.8 m) at the elevated position of the belt conveyor must be equipped with a drawstring test device. The definition of the deviation of the belt machine: the upper surface of the upper belt is out of the upper roller for the deviation, and the lower belt is the deviation of the belt.
4. At least two sets of anti-ripping protection shall be installed at each receiving point of the tape machine. The tear-proof protection distance shall not exceed 5 meters. The longitudinal tearing of the rope shall be placed in the middle of the vertical tearing of the pirated sheet. Rope plus travel switch form and two logic "AND gate" flap cleaner plus travel switch form;
5. When the tape machine installation length exceeds 100 meters, at least one pull-type emergency stop switch should be set every 100 meters, and one intelligent amplified telephone should be set every 200 meters; all locked and amplified telephones should have a locking function, and Number management along the line and the amplified telephone.
There is no lighting or protective net at the end of the tape machine head, and the fine is 200 yuan.
The iron remover is not set or the iron number is not managed as required, and the fine is 300 yuan. The iron remover is not cleaned in time and is fined 50 yuan each time.
The belt crossing bridge does not meet the above installation standards and is fined 100 yuan.
The team team did not regularly inspect the tape machine or the records were incomplete, and each time the fine was 100 yuan.
The belt conveyor is short of idle rollers or idlers, the shelves are not fixed, and the support is not strong. Each unit is fined 50 yuan.
The belt conveyor hanging, support and fixed connection are not reliable, and each unit is fined 200 yuan.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc