Pvc Insulation Tape Cutting Machine

Pvc Insulation Tape Cutting Machine

Top selling transparent cello tape slitting machine 

Suitable for the slitting of BOPP, OPP, PE, PET, Aluminium and etc.

Pvc Insulation Tape Cutting Machine

Tape Making Machien

 

Protection management regulations:

Article 3
The tape machine protection installation must meet the following requirements:

6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;

 

Pvc Insulation Tape Cutting Machine

Tape Making Machien

 

Protection management regulations:

Locking line hanging requirements:

3. When laying the lock line, ensure that the lock line is parallel to the center line of the belt conveyor. When the direction of the lock line needs to be changed in special circumstances, the lock line must be locked at both ends of the lock line. At the same time, the tension of the lock line should be appropriate. The overall balance is between 0.2m and 0.5m. It should not be lapped or folded except for the nose and the tail.
4. The head and tail of the tape machine are limited by the length of the lock line, which can be processed by the coil, but all the excess lock lines must be in one coil, and the end of the coil at the end of the coil or the tail must be less than 10 meters. . At the same time, the rim lock line should be fixed firmly to ensure reliable locking of the adjacent end when pulling the lock line.
5. The locking line of the fully mechanized mining belt conveyor entering the shifting train section is strictly prohibited from being directly bundled with the monorail crane cable.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com