Top selling transparent cello tape slitting machine
Suitable for the slitting of BOPP, OPP, PE, PET, Aluminium and etc.
Tape Making Machien
Protection management regulations：
Locking line hanging requirements:
1. All tape machine locking lines must be hung with special lifting rings. The spacing between the lifting rings is 3 meters. It is strictly forbidden to share the same cable hook with other cables. It is strictly forbidden to tie the locking wires directly to the belt frame or to the ground.
2. The height of the tape machine lock and lock line should not exceed 1.5 meters from the ground. The lock line of the drive section of the fully mechanized mining belt conveyor to the unloading section and the cross-row section of the continuous belt conveyor can be laid along the shelf, but at least in this section. Place the latching drawstring 2 evenly.
The tape machine has a face deviation range of more than 30 meters. It has not been adjusted or taken in time, and the fine is 200 yuan each time.
There is water on the top of the belt conveyor, and there is floating coal in the bottom belt. The penalty is 50 yuan per place.
The drum flaw detection and the wire rope surface inspection were not carried out as required, and the fine was 500 yuan each time.
The tape machine protection installation is not complete, each one is fined 500 yuan, the installation does not meet the above criteria, each party is fined 100 yuan, and the fine is not 50 yuan per test.
The amplified telephone or the lock has no emergency stop function, no lock device, no number management, and each unit is fined 50 yuan. The tape machine startup delay is less than 30s or no warning, and the penalty is 100 yuan each time.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc