Tape Making Machien
Protection management regulations：
Locking line hanging requirements:
1. All tape machine locking lines must be hung with special lifting rings. The spacing between the lifting rings is 3 meters. It is strictly forbidden to share the same cable hook with other cables. It is strictly forbidden to tie the locking wires directly to the belt frame or to the ground.
2. The height of the tape machine lock and lock line should not exceed 1.5 meters from the ground. The lock line of the drive section of the fully mechanized mining belt conveyor to the unloading section and the cross-row section of the continuous belt conveyor can be laid along the shelf, but at least in this section. Place the latching drawstring 2 evenly.
Tape Making Machine
There is no lighting or protective net at the end of the tape machine head, and the fine is 200 yuan.
The iron remover is not set or the iron number is not managed as required, and the fine is 300 yuan. The iron remover is not cleaned in time and is fined 50 yuan each time.
The belt crossing bridge does not meet the above installation standards and is fined 100 yuan.
The team team did not regularly inspect the tape machine or the records were incomplete, and each time the fine was 100 yuan.
The belt conveyor is short of idle rollers or idlers, the shelves are not fixed, and the support is not strong. Each unit is fined 50 yuan.
The belt conveyor hanging, support and fixed connection are not reliable, and each unit is fined 200 yuan.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc