Gum tape making machine making printed &clear & color different sizes small tapes on same machine by one step from raw materials (bopp film,water based pressure sensitive glue,paper core).
Tape Making Machine
1 According to the requirements of the process sheet, the base material of the bag to be bagged is installed at the center of the loading shaft by a hydraulic vehicle, and the air-expansion shaft is inflated with a pneumatic gun. Start the air pressure lifting device to place the substrate in the appropriate discharge position. Check the roll substrate for product defects and strips. If it is necessary to keep in mind the joint position, in order to eliminate defective products during the bag making process.
2 Correctly dressing.
3 After the material is finished, the heat-sealing tool that meets the product requirements can be replaced according to the requirements of the process.
4 Turn on the main power, cooling water, static elimination device and compressed air source. According to the process requirements, set the appropriate temperature of the corresponding heat sealing knife through the operation interface.
5 Set the discharge tension air pressure and put it into automatic.
6 Through the spot button, the material is sent to the cut position required by the process sheet, and the length of the bag is adjusted to track the sensitivity of the electric eye. If punching is required, adjust the position of the rounded hole and the tearing opening.
7 Through the man-machine interface, set the bag size according to the requirements of the process sheet, the bag feeding speed, the quantity of finished products and the sealing ratio
Tape Making Machine
Safe operation method in the production process
1 Wear high-temperature gloves when replacing the heat-sealing knife. When installing, be careful to prevent the heat-sealing knife from falling or being damaged.
2 When the punching device is running, it is forbidden to use the hand to clean the adhesive in the working area.
3 In the bag making process, use the knife correctly to avoid scratching the knife.
4 When using a manual forklift, it must be carried out in strict accordance with the manual forklift operation instructions.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc