Gum tape making machine making printed &clear & color different sizes small tapes on same machine by one step from raw materials (bopp film,water based pressure sensitive glue,paper core).
Tape Making Machien
Protection management regulations：
The tape machine protection installation must meet the following requirements:
6. All belt conveyors drive the drum section and the tail drum to install an over-temperature and automatic smoke sprinkler, and must be installed near the drum to ensure that the automatic sprinkler can effectively extinguish the fire in the event of fire; the water supply system is guaranteed to be unblocked, and no artificial shutdown is allowed. .
Temperature Sensor Installation Standard A temperature sensor is required at each drive roller. The temperature sensor should be mounted along the middle (axial) of the drive roller, 100 mm from the roller surface.
Smoke sensor installation standard For the belt conveyor using the unloading roller as the driving roller, the smoke sensor should be installed directly above the drum, no more than 1000mm from the surface of the drum; for the ordinary driving belt conveyor, the smoke sensor should be installed on the upper roller The middle position of the frame is 1000mm behind the lower air flow side driving roller.
Offset installation requirements: The action point of the deviation switch is not more than 50MM from the outer edge of the idler on the belt conveyor. The deviation between the deviation and the belt surface is 90 ° ± 5 °; the deviation switch must be fixed with a special shelf and must not be swung;
Tape Making Machine
The tape machine has a face deviation range of more than 30 meters. It has not been adjusted or taken in time, and the fine is 200 yuan each time.
There is water on the top of the belt conveyor, and there is floating coal in the bottom belt. The penalty is 50 yuan per place.
The drum flaw detection and the wire rope surface inspection were not carried out as required, and the fine was 500 yuan each time.
The tape machine protection installation is not complete, each one is fined 500 yuan, the installation does not meet the above criteria, each party is fined 100 yuan, and the fine is not 50 yuan per test.
The amplified telephone or the lock has no emergency stop function, no lock device, no number management, and each unit is fined 50 yuan. The tape machine startup delay is less than 30s or no warning, and the penalty is 100 yuan each time.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc