bopp self adhesive packaging tape printing coating slitting machine producing clear & color & printed packing tapes.
Coating Machine - End check item:
1. Scratches should be promptly responded to the head personnel.
2. Check parameters such as thickness, coating length, coating width, gap and tracking every 10 minutes.
3. When the belt is wrinkled, it should be promptly reacted or solved by itself.
4. Check if the correction is in the automatic state.
5. Whether there are particles on the guide roller.
6, the occurrence of cracks, bubbles, spots, leaking foil, water lines and other phenomena like timely response.
7. Check the dry humidity of the pole piece.
8. The density should be measured in time after changing the volume.
9. Check if the tension is restored.
10. After the operation is completed, it is necessary to clean up the site in time.
Coating Machine - Materials and tools used in the coating process (excluding positive and negative slurry):
1 copper foil
Thick 0.009 mm
2 aluminum foil thickness 0.018mm
3 high temperature resistant aluminum foil tape 50mm wide
4 double-sided tape width 50mm
5 Industrial alcohol
6 feeler gauge 0.01-1mm
7 micrometer 0.001mm
8 balance scale 0.001g
9 steel ruler 0-50cm
10 artist blades
11 silicone sheet 10X10cm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc