1.Extent coating and compound distance, more suitable for thermal paper adhesive produce and other temperature resistance material compound.
2.With high precision and hard strength stand wear and tear die, ensure 200m/min high speed coating efficiency, and extent die life.
Adhesive Tape Coating Machine operation process:
1. Prepare before starting up
1) Check each electrical switch for any abnormalities such as falling off or damage.
2) Wear the traction belt at the normal temperature stop condition according to the requirements of the process piece.
3) Start the exhaust unit.
4) Confirm that there is no open flame in the coating machine room.
5) The coater control cabinet and the drying cabinet housing must be reliably grounded.
1.2 boot program
1) Close the main power switch and the power switch on the control cabinet.
2) Set the initial value (usually 180 to 280) and the division ratio on the tension controller.
3) Set the coating working mode and related parameters (coating speed, section length, gap length, roll speed ratio, etc.), and then turn on the compressed air;
4) Start the drying fan and the drying temperature controller.
5) Turn on the automatic deskew and tension controller power.
6) The temperature of each section of the equipment has reached the required temperature of the process;
7) Feed the coating device hopper while starting the coater for coating.
1.3 shutdown procedure
1) Confirm that the coated pole piece has been wound up and then stop.
2) Turn off the heater power of the equipment and stop the drying fan and other fans when the temperature of each section drops below 60 degrees Celsius;
3) Stop the compressed air.
4) Disconnect power from the correcting cabinet and control cabinet.
Coating Machine - Process flow
Second, coating materials equipment, tools:
Positive electrode slurry, negative electrode slurry, aluminum foil, copper foil, aluminum foil tape (for connecting joints), double-sided tape (connecting lead tape), traction belt (waste copper aluminum foil), alcohol (for scrubbing roll surface), Wipes, compressed air, coated plug gauges (used to remove scratches), micrometers (for thickness measurement), balance scales (weighing, density measurement), blades, material boxes, rulers, fine needles, blades.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc