" Jumbo Roll Coating Machine

" Jumbo Roll Coating Machine

1.Main engine & pump full-automatic tracking system and constant tension control system, no matter ensure the coating stability, improve the material compound roughness.

2.Double position for taking up roller and full automatic not reduce changing roller, greatly improve the equipment operation and produce efficiency.

" Jumbo Roll Coating Machine

Coating Machine - matters needing attention

 

1. The maximum temperature of the positive electrode coating should not exceed 125 oC on one side. The single surface is not easy to dry. The non-stick roller is the standard. The reverse speed is slow and thoroughly dried.
2. The temperature of the single side of the negative electrode should not exceed 105 oC, and the temperature of double coating should not exceed 110oC.
3. The coated pole piece must be completely baked. If it does not dry or has the phenomenon of stripping, the temperature of the temperature zone can be properly adjusted, the temperature can be lowered, the pole piece can be stripped, the temperature can be lowered, and the temperature can be raised.
4. The density is adjusted by adjusting the screw.
5, the thickness is adjusted by adjusting the screw, so that the two sides reach a consistent speech.
6. Adjust the speed and temperature to achieve the best coating.

" Jumbo Roll Coating Machine

Coating Machine - matters needing attention

7. When adjusting the gap between the coating roller and the back roller, the slurry on the coating roller should be wiped off without sticking the back roller. The parallel and the gap of the two rollers must be consistent (there must be a gap).
8. Immediately after each shift, clean the hopper, scraper, coating roller and back roller with alcohol or acetone. The surface must not be scratched or damaged.
9. Pay attention to keeping the back roller cylinder and linear slide clean and lubricated.
10. The bearing parts of the machine must be lubricated regularly, and the gear box must be changed or replenished regularly.
11. Once problems are found during the operation, they must be recorded and notified to the relevant departments for timely processing.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com