1. High precision alloy steel die head make sure the customer can get the best coating effection.
2. Total Machine is controlled by PLC.Precision control coating speed and glue amount.
3. Increase the film function in some glue or substrate is not suitable for direct knife coating that realize 2 kinds of craftwork (knife coating and film coating.) on one machine.
It's be mainly used for bopp film gelatinizing producing，The tape is mainly used to seal the box, seal the cover and bind the articles, and can also be used as office supplies.
Coating Machine - matters needing attention
7. When adjusting the gap between the coating roller and the back roller, the slurry on the coating roller should be wiped off without sticking the back roller. The parallel and the gap of the two rollers must be consistent (there must be a gap).
8. Immediately after each shift, clean the hopper, scraper, coating roller and back roller with alcohol or acetone. The surface must not be scratched or damaged.
9. Pay attention to keeping the back roller cylinder and linear slide clean and lubricated.
10. The bearing parts of the machine must be lubricated regularly, and the gear box must be changed or replenished regularly.
11. Once problems are found during the operation, they must be recorded and notified to the relevant departments for timely processing.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc