Polyester Film Slitting Machine

Polyester Film Slitting Machine

Introduction to slitting machine:
     Slitting machine is a kind of mechanical equipment for slitting wide sheets of paper or film into a plurality of narrow-width materials, which are commonly used in papermaking machinery and printing and packaging machinery.
     The traditional control scheme of the slitter is to use a large motor to drive the shaft of the rewinding and unwinding. A magnetic powder clutch is added to the reel and reel, and the resistance generated by the magnetic clutch is controlled to control the tension of the surface of the material. . Magnetic powder clutches and brakes are special automatic actuators that transmit torque through the magnetic powder filled in the working gap. The magnetic current can be changed to change the magnetic state of the magnetic powder, and then the transmitted torque can be adjusted. It can be used for stepless speed regulation from zero to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed control system. It is also used to adjust the torque by adjusting the current to ensure an unwinding or rewinding tension control system with a constant tension during winding.

Polyester Film Slitting Machine

Slitting machine operating procedures -

Third, through the film:

5. Press “Release Brake” again until the indicator light flashes and the unwinder brakes.
6. Press and hold the “Pinch with chain” button, the film is pulled through the chain to the sipe roll, and the film is removed from the shackle on the chain.
7. Press “Device Jog”, the film moves along the machine running direction to the winding side 2, both sides are pulled out, release the button, and flatten the film.
8. The “cutting knife switch” is in the open position, and all the cutting cutters that need to be cut are marked.

Polyester Film Slitting Machine

Slitting machine operating procedures -

Third, through the film:

9. Press “Device Jog” again, and the film on both sides will be flattened until the slitting film appears on the winding side 2, and the film is cut with a knife.
10. Manually pull the slit film on the winding side 1 and the winding side 2, bond the film to the corresponding paper core, and tighten the film and stick the flat film to the paper core (note the side 1 and side 2 films). Wearing different methods).
11. Manually adjust the leading edge probe into position.
12. Set the winding length and winding diameter on the operation screen (see the preset length and diameter method for details)

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com