Opp Tape Jumbo Roll Slitter

Opp Tape Jumbo Roll Slitter

Tape cutting machine range:
1. Applicable substrate: mica tape, paper, insulation material and film slitting
2, applicable industry: related industries with various insulating materials, special electrical paper, film
3. Applicable technology: sub-distribution, finished product inspection, finished product sub-volume, process cutting

Opp Tape Jumbo Roll Slitter

Main way of tension control
The tension control method is generally divided into two types: open loop control mode and closed loop control mode. The open loop control is to directly drive the winding mechanism with an electric motor having a similar winding characteristic n = kD (n is the rotational speed, k is a constant, and D is the diameter of the winding roller) to obtain an approximate constant tension operation. The open loop control has poor randomness and low control precision. The closed loop tension control has two kinds of direct tension control and indirect tension control. In the actual production process, the volume is adjusted, that is, the tension is fed back, compared with the given tension, and then the difference is applied to the regulator to adjust the controlled object so that the output tension meets the actual demand. It is called direct tension closed-loop control. This method can eliminate the steady-state error without considering various compensations. The indirect tension control uses the motor speed-torque characteristic curve to control the torque to control the torque, so as to achieve the purpose of controlling the tension. This method requires dynamic and static compensation. Sometimes, in order to obtain more precise control performance, a composite tension control method is adopted, that is, the required control amount is first determined according to an indirect control algorithm, and various compensations are considered to make the indirect control as accurate as possible, and then the direct tension control is used for fine adjustment.

Opp Tape Jumbo Roll Slitter

Slitting machine instruction manual -

Second, the use of procedures;

4. Check the position of the knife holder and the nozzle of the drum on the left side of the drum, and adjust the left and right distance of the blade so that the blade can be cut into the blade groove of the drum in the middle. The distance between the two blades is the length of the cutting nozzle: 20mm and 15mm. , tighten the screws on the blade holder to secure the blade position

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com