Office Tape Slitting Rewinding Machine

Office Tape Slitting Rewinding Machine

Tape slitting machine feeding, filming and filming
1. Loading: According to the requirements of the cutting plan, according to the driving operation rules, according to the actual situation, hoist the corresponding mother roll on the aging frame, place it on the unwinding unwinding frame according to the inner and outer selection direction of the corona surface, and use the control button Clamp the steel core, leave the steel core support arm and drive.
2. Film penetration: When there is no film on the slitter, the film must be penetrated. Using the slitting machine through the membrane device and the function keys, one end of the original membrane is attached to the membrane chain eyelet, and the membrane button is activated to distribute the membrane along the slitting process to be evenly distributed on each roller.
3. Film: When there is a film on the slitter, when changing the joint, use the vacuum filming table to start the filming station to the working position, manually flatten the film on the first pulling roller of the slitting machine and start the upper vacuum pumping film. Soak the film flat on the filming table, attach the double-sided tape and cut off the excess film under the tape, flatten the film on the unwinding frame and start the lower vacuum pump to make the film flat and absorb the paper. Layer and flatten the adhesive film, the joints should be neat and wrinkle-free, then turn off the upper and lower vacuum pumps to open the filming station to the inoperative position.

Office Tape Slitting Rewinding Machine

Slitting machine instruction manual -

First, the basic parameters
1. Applicable nozzle length 80-120mm, diameter 5-8mm 2. Total machine power: 1.6kw, 380v 3ph
3. Dimensions: 8500*700*1700mm (L*W*H) 4. Weight: 500KG

Office Tape Slitting Rewinding Machine

Slitting machine instruction manual -

Second, the use of procedures;

4. Check the position of the knife holder and the nozzle of the drum on the left side of the drum, and adjust the left and right distance of the blade so that the blade can be cut into the blade groove of the drum in the middle. The distance between the two blades is the length of the cutting nozzle: 20mm and 15mm. , tighten the screws on the blade holder to secure the blade position

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com