Slitter Rewinder

Slitter Rewinder

The rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks: first, cutting off the raw paper burrs; second, cutting the whole original paper into 
a plurality of widths in accordance with user specifications; Third, control the winding diameter of the finished paper roll to meet the factory specifications.

 

Advantages of the winder
1, equipped with processing unintentional, solid, paper tube toilet paper, can instantly switch between products. 2, automatic trimming, glue spraying, sealing, and the shaft is instantaneously synchronized, so that the paper is transferred into the band saw and the paper is not damaged when it is cut.
3. Pneumatic belt feeding, double reel and each axis of the original paper have independent tension adjustment mechanism.

Slitter Rewinder

Rewinding Machine safety operation guide - 

Fourth, joint operator joint quality:

Joint quality control
1 tape should not be exposed; prevent sticking between sheets.
2 The outer sheet of the joint must be flattened, straightened without wrinkles, and the end surface is not protruding.
3 When the joint is cut, the paper edge shall not be larger than 5mm and neat.
4 The outer tape of the joint must be a straight line.
5 connector label placed at the joint
6 The number of joints should be less than the specified value.

Slitter Rewinder

Rewinding Machine safety operation guide - 

Fifth, the tool change operation:
1. The bottom knife replacement is handled by the mechanic.
2. The rewinding machine must be stopped when the upper round knife is replaced.
3. After removing the round blade, replace the new blade and fix it.
4. Install the round knife seat, adjust the angle, and lower the round knife to make it close to the bottom knife.
5, running, paper test knife, paper edge is not, smooth.
6. The tightness and depth of the blade and the bottom knife should be controlled properly, not too tight, otherwise the new knife
The film will roll the knife; it should not be too loose, otherwise it will jump the knife and the hair; not too deep, otherwise it will cause double trimming; too shallow will jump the knife.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com