Scotch Tape Cutter

Scotch Tape Cutter

Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.

Scotch Tape Cutter

Handheld Tape Cutting Machine - Introduction


      Some tape machines are small, and the tape machine and tape can be taken together where they are needed. This type of tape machine can easily cut the tape and the user can easily use the cut tape. It allows to be taken wherever the user wants to use it.

Scotch Tape Cutter

Desktop Electronic Tape Cutting Machine - Introduction


      Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com