Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.
◆Microcomputer intelligent control, LED display length, automatic cutting of adhesive tape of any set length. Manual, automatic switching
◆Fixed length range: 5-999mm
Adhesive paper reference type
◆ Teflon tape, cellophane, cotton tape, vinyl tape, tape, polyester film, glass adhesive tape, universal paper. Technical Specifications
◆Product Description: Tape width: 7-50mm Applicable tape inner diameter: 25, 32, 75mm
◆Adhesive paper set length: 5-999mm Weight: 2400g Power: 18W
◆Size: 137×245×150mm Power supply: AC 110V 60Hz/220V 50Hz
◆Automatically cut adhesive tape of any set length.
◆LED directly displays size data.
◆Box-shaped cutting parts are easy to disassemble and replace
◆Adhesive paper reference type: Ethylene polyether paper Teflon adhesive tape, cellophane Acetate-based adhesive tape, masking adhesive tape Glass cloth adhesive tape, plain paper aluminum foil adhesive tape, cotton adhesive tape Soft adhesive tape Polyester adhesive tape Vinyl adhesive tape, double adhesive tape
Automatic tape cutting machine price and its working principle-
The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving. The price of such automatic tape cutters varies, and the price of the tape cutter is determined according to its model and function.
The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting. The automatic tape cutting machine we use works in the same way as the laser cutting machine. It only changes the laser to the blade, and the working efficiency is not reduced. Moreover, the blade can be switched after the blade is worn, which is convenient and simple. The price is also much better than the price of the laser tape cutter.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc