Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.
The characteristics and use of masking tape and tape cutting machine-
Masking tape is a kind of tape that is widely used in indoor and outdoor decoration, electronics, automobile, electroplating, shoemaking, packaging, furniture and other industries to cover, link and fix the paint. The tape is made of crepe paper and coated with a special pressure sensitive adhesive. Due to its unique toughness, it is very troublesome when cutting this tape, so many companies will use Hongjin's tape cutting machine when using masking tape, which can effectively cut the tape without delay. .
There are many kinds of masking tapes. We have high temperature masking tape, high temperature masking tape, normal temperature masking tape, medium temperature masking tape, decorative masking tape, masking tape, etc. Color masking tape, composite masking tape and spray tape. Of course, if these tapes are used in industrial production and packaging, Hongjin tape cutting machine is an indispensable mechanical product. Since the masking tape is more viscous and has excellent temperature resistance, it does not leave any residue for pasting various items. Under normal temperature conditions, such tapes are mostly used in civil commercial building decoration, painting, painting, color separation, painting and electronic industries.
Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc