Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.
Guolian tape cutting machine GL-704 parameters:
LED directly displays size data;
Box-shaped cutting parts and replacement, saving time and effort, automation, high efficiency;
The tape has no trace, the slit is flat, and it is automatically cut off after automatic feeding. It is free to press the switch, cut the length of 20-999mm), set it arbitrarily, and automatically send the tape to cut.
Adhesive paper width: 7-50MM;
Applicable adhesive tape inner diameter: 25.32.75mm;
Adhesive paper set length: 20-999mm;
Power supply: AC220V 50Hz.
GL-704B tape cutting machine properties:
Adhesive tape: suitable for adhesive tape;
Non-stick material: suitable for non-stick materials;
Safety protection: 1 Safety protection function is provided 2 Safety design that does not work even if it is mistakenly inserted into the finger machine;
Length indicates: 1 tape length display is provided 2 If 2 to 3 lengths are set, tapes of different lengths will be cut in order;
Viscosity Non-tacky: Both viscous and non-adhesive tapes;
There is an incrementing down counter： 1 has an incrementing down counter 2 has a counting function for confirming the number of cuts;
Help memorize data： 1Help memorize data 2 Even if the power is turned off, the cut size can be memorized and displayed again;
Scotch tape translucent tape: transparent tape for translucent tape;
Automatic feeding belt: automatic feeding function;
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc