Smart Tape Cutter

Smart Tape Cutter

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Smart Tape Cutter

Tape Cutting Machine - related instructions

The tape cutting machine is also a tape machine, which is an indispensable small auxiliary mechanical device for most production lines, but there is no specific explanation for the technical operation. The following is a description based on the operation of the tape cutting machine. The operation of the tape cutter is different from that of the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).

Smart Tape Cutter

Automatic tape cutting machine - Introduction:


        The tape machine, also known as the tape cutter and tape cutter, is an object that can support a roll of tape and has mechanical means on the other end for cutting the tape. The cutting machine is divided into many types depending on the type of tape to be cut. The most common and most common are clear plastic cutting machines (like those often used in the office or at home), made of plastic; some may be consumables. Other tape cutters are fixed, and some machines have complex functions to control the feeding and cutting of the machine and are also ergonomic in use.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com