Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
Glued (water-active) tape cutting machine
Glued (water-active) tape cutters measure, feed, wet and cut glued tape or water-activated tape. This type of tape usually consists of a paper base and glue, which is not viscous if it is activated without water. To accomplish this, these tape machines are usually equipped with a water bottle and a wetting brush to wet each piece of tape. Many tape cutters are also equipped with an upper heater that is mounted above the belt area to maximize the wetting of the tape – ideal for use in cold environments. Glued tape cutters are commonly used in packaging or shipping departments to package cartons.
Automatic tape cutting machine price and its working principle-
The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving. The price of such automatic tape cutters varies, and the price of the tape cutter is determined according to its model and function.
The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting. The automatic tape cutting machine we use works in the same way as the laser cutting machine. It only changes the laser to the blade, and the working efficiency is not reduced. Moreover, the blade can be switched after the blade is worn, which is convenient and simple. The price is also much better than the price of the laser tape cutter.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc