Log Roll Cutting Machine

Log Roll Cutting Machine

Tape Cutting Machine- working principle
The tape cutting machine is also called a tape cutter. The tape is cut by the upper and lower blades, and the length is set according to the length of the customer's demand. 
The tape cutter has a sensor, and after the tape cutter cuts the tape,The tape will fall over the sensor. If the tape is removed, the sensor will automatically sense that there is 
no tape and immediately send a signal, and the tape will automatically perform the next cutting action. This kind of action is repeated continuously, that is, automatic continuous cutting.
Yuanxiao tape cutting machine mainly has automatic tape cutting machine and manual tape cutting machine. Now it has a wide range of automatic application. Manual cutter is mainly used for tape sealing. 
Automatic tape cutters are used in the electronics industry, wire harness industry.

Log Roll Cutting Machine

Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
specification:
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Weight: 3kg
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;

Log Roll Cutting Machine

The difference between the scope and model of the tape cutting machine - 

Adhesive paper cutting machine M-3000-NMSR

Features:
It has the function of setting 3 different lengths. The configuration has an up-down counter.
Most suitable for independent production. Suitable for neutral production lines. Various adhesive tapes that are commercially available can be used. Automatically transfer and cut automatically in a certain size.

Specifications:
Tape width: 20mm-75mm
Tape length setting range: 40mm-999mm Maximum tape outer diameter: 210mm
Power supply: AC 230V 50/60Hz (110V, 117V is also available)

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com