Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;
GL-704B tape cutting machine product specifications:
Tape cutter product specifications: Size: 1.3M / 1.6M
■Power supply: AC100V or 230V 50/60Hz
■Setting range of tape length: 30 to 999 mm (in 1 mm position)
■Applicable tape width: 7～50mm
■Maximum tape outer diameter: 150mm
■Packing unit: 1 set
■Inner core I.D.： 1"-3"
■Min. Cutting width： 1mm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc