Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
Desktop Electronic Tape Cutting Machine - Introduction
Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.
Automatic tape cutting machine price and its working principle-
The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving. The price of such automatic tape cutters varies, and the price of the tape cutter is determined according to its model and function.
The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting. The automatic tape cutting machine we use works in the same way as the laser cutting machine. It only changes the laser to the blade, and the working efficiency is not reduced. Moreover, the blade can be switched after the blade is worn, which is convenient and simple. The price is also much better than the price of the laser tape cutter.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc