Duck Tape Slicing Machine

Duck Tape Slicing Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Duck Tape Slicing Machine

Semi-automatic tape cutters are usually divided into three categories:

Depending on the properties of the pressure-sensitive adhesive tape, the automatic tape cutter has many different functions and is divided into various models:

Adjustable pressure belt
The user is allowed to control the pressure exerted on the tape as the roller conveys the tape. This feature is especially useful for efficiently cutting tapes of different thicknesses.


Improved wheel
Depending on the type of tape being cut, many automatic tape dispensers are equipped with improved rollers to better cut narrow tapes, protective films, sponges and the like.


Photoreceptor
Many tape machines are equipped with a photoreceptor to detect the presence or absence of tape on the paper exit and then execute the tape feed command. The tape machine can also be equipped with two photoreceptors so that two rolls of tape can be cut at the same time.

Duck Tape Slicing Machine

Glued (water-active) tape cutting machine


      Glued (water-active) tape cutters measure, feed, wet and cut glued tape or water-activated tape. This type of tape usually consists of a paper base and glue, which is not viscous if it is activated without water. To accomplish this, these tape machines are usually equipped with a water bottle and a wetting brush to wet each piece of tape. Many tape cutters are also equipped with an upper heater that is mounted above the belt area to maximize the wetting of the tape – ideal for use in cold environments. Glued tape cutters are commonly used in packaging or shipping departments to package cartons.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com