Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
Guolian tape cutting machine GL-704 parameters:
LED directly displays size data;
Box-shaped cutting parts and replacement, saving time and effort, automation, high efficiency;
The tape has no trace, the slit is flat, and it is automatically cut off after automatic feeding. It is free to press the switch, cut the length of 20-999mm), set it arbitrarily, and automatically send the tape to cut.
Adhesive paper width: 7-50MM;
Applicable adhesive tape inner diameter: 25.32.75mm;
Adhesive paper set length: 20-999mm;
Power supply: AC220V 50Hz.
GL-704B tape cutting machine product specifications:
Tape cutter product specifications: Size: 1.3M / 1.6M
■Power supply: AC100V or 230V 50/60Hz
■Setting range of tape length: 30 to 999 mm (in 1 mm position)
■Applicable tape width: 7～50mm
■Maximum tape outer diameter: 150mm
■Packing unit: 1 set
■Inner core I.D.： 1"-3"
■Min. Cutting width： 1mm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc