Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
GL-704B tape cutting machine properties:
Adhesive tape: suitable for adhesive tape;
Non-stick material: suitable for non-stick materials;
Safety protection: 1 Safety protection function is provided 2 Safety design that does not work even if it is mistakenly inserted into the finger machine;
Length indicates: 1 tape length display is provided 2 If 2 to 3 lengths are set, tapes of different lengths will be cut in order;
Viscosity Non-tacky: Both viscous and non-adhesive tapes;
There is an incrementing down counter： 1 has an incrementing down counter 2 has a counting function for confirming the number of cuts;
Help memorize data： 1Help memorize data 2 Even if the power is turned off, the cut size can be memorized and displayed again;
Scotch tape translucent tape: transparent tape for translucent tape;
Automatic feeding belt: automatic feeding function;
The difference between the scope and model of the tape cutting machine -
Adhesive paper cutting machine M-3000-NMSR
It has the function of setting 3 different lengths. The configuration has an up-down counter.
Most suitable for independent production. Suitable for neutral production lines. Various adhesive tapes that are commercially available can be used. Automatically transfer and cut automatically in a certain size.
Tape width: 20mm-75mm
Tape length setting range: 40mm-999mm Maximum tape outer diameter: 210mm
Power supply: AC 230V 50/60Hz (110V, 117V is also available)
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc