Roll Tape Cutting Machine

Roll Tape Cutting Machine

Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material

Roll Tape Cutting Machine

The difference between the scope and model of the tape cutting machine - 

Protective film cutting machine TDA080-NMSR

Features:
It has the function of reducing the wrinkles and indentations generated by the roller on the protective film and the aluminum foil tape. Configure specially machined smooth rollers.
It has anti-static effect and can prevent the tape from adhering to the machine casing. Specialized heavy duty cutting machine for industrial use. Suitable for work of more than 8 hours a day.
A machine that uses metal parts and metal parts for maintenance and repair. Automatically transfer and cut automatically in a certain size. A grounding wire is required for the included 3-pin plug body.

Specifications:
Tape width: 13-80mm
Tape length setting range: 40-9999mm Maximum tape outer diameter: 230mm
Power supply: AC 100V 50/60Hz (117V, 230V is also available)

Roll Tape Cutting Machine

Tape cutter model difference ---
The tape cutter GL-3700 is a disc tape cutter that does not have any curling when cutting the tape. The tape is cut very neatly and tidyly; the tape cutter does not need to adjust the blade; there is a handle in the middle of the machine. It is used to adjust the length of the tape cutting. The closer the handle is to the disc, the shorter the length of the tape cutting. Conversely, the farther away, the longer the tape cutting length; the cut tape will be automatically pasted on the disc. It is convenient for staff to use.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com