Adhesive Tape Die Cutting Machine

Adhesive Tape Die Cutting Machine

Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material

Adhesive Tape Die Cutting Machine

The relationship between the tape cutting machine and the tape -

2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.

Adhesive Tape Die Cutting Machine

Tape cutter model difference ---

The tape cutting machine GL-7000 and GL-5000 are similar. It is a rollerless design with a set memory function. The film can be easily fixed through the elastic film auxiliary shaft. The safety bezel is added at the edge of the knife. Built-in pliers and lubricating oil. The partition is for easy operation and the latest anti-static ABS material. The tape cutter GL-7000 is arguably the most practical machine.


The main products of Zhengzhou Guolian Machinery Co., Ltd. are tape cutting machine GL-3700, tape cutting machine GL-5000, tape cutting machine GL-7000 and other brand-name tape cutting machines. Welcome customers from all over the world to come and discuss cooperation!

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com