Foam Tape Die Cutting Machine

Foam Tape Die Cutting Machine

Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material

Foam Tape Die Cutting Machine

Semi-automatic cutting machine technical operation rules

7. Regular inspection of accuracy and variability
7.1 Detect the positive and negative turbulence of the main motion clutch after it is closed. The value is less than 2.0mm.
7.2 Detecting the running speed adjustment range of the host: the minimum speed is not more than 50mm/min, and the maximum speed is not less than 120mm/min.
7.3 Detecting the gas path part includes the connection of the connecting hose: air tightness: oxygen closed circuit 1.2Mpa, mixed gas path: 0.6 Mpa voltage regulation for 20 seconds shall not leak.
7.4 Detecting the thickness range of the cut steel plate: 10-100mm is acceptable.
7.5 Flame burning test of the torch (visible cutting oxygen flow length): 1#≥70mm; 2#≥90mm;3#≥100mm.
8. Daily maintenance regulations
8.1 After cutting the mouth, pay attention to the protective cover of the fashion, and do not bump.
8.2 Pay special attention to moisture when using and storing.
8.3 The lubricant in the gearbox should be replaced in time.

Foam Tape Die Cutting Machine

Laser tape cutting machine---
Laser tape cutting machine is a new technology that has been used in various industries, including tape, metal cutting, glass cutting and engraving. A laser is a kind of light, like its electroluminescence in nature, is caused by the transition of atoms (molecular or ion kites) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light. The laser depends on spontaneous emission only in the initial very short time. The subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directionality. , engraving machine, extremely high luminous intensity. At the same time, the laser has high coherence, high strength and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated onto the processed object through the collecting mirror, so that the processed object (surface) is subjected to strong heat energy and the temperature is sharply increased. This point is rapidly melted or vaporized due to high temperature, and the trajectory of the laser head is used to achieve the purpose of processing.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com