Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
utomatic tape tape cutting machine ---
With the continuous development of industrial technology, traditional manual work such as cutting tape is now replaced by machines. Tape cutting machine is also called adhesive paper cutting machine and tape machine.
Cutting length: between 3-999mm
Cutting width: between 3-100mm
Such an automatic adhesive tape cutting machine can be used in the production and packaging processes of electronics, machinery and other factories: labeling, fixing, etc., can greatly improve work efficiency, save labor costs, and ensure the quality of work.
Automatic tape cutting machine --- Working principle
The automatic tape cutting machine is a small-scale automation device that is used on the assembly line to greatly improve production efficiency. There are basically two types: mechanical and electronic.
The mechanical type is disc type, and the common models are ZCUT-2 and upgraded zcut-8. The zcut-8 is favored by users because of its smaller size and more precise cutting.
The commonly used electronic models are M-1000 and ZCUT-9. Among them, ZCUT-9 tape cutting machine is more and more accepted by customers because of its precise cutting and easy maintenance.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc