Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
BOPP/Masking/Kraft/Foam Tape Automatic Cutting Machine:
Suitable for cutting various tape, such as: BOPP, PVC, PE, masking tape, double sided tape, kraft paper tape, foam tape, industrial tape and paper, film, etc.
1) Cutting shaft and circular blade are driven by MITSUBISH inverter and A.C motor.
2) The acceleration and deceleration are fast and steady and running direction: forward/reverse upon setting.
3) Cutting width setting is controlled by MITSUBISH servo motor, ball screw, guide rails for precise movement.
4) MITSUBISHI PLC programmable central control and all functions operate under LCD touch screen panel which is for all data setting.
5) Knife feeding is controlled by MITSUBISHI servo motor and the cutting speed is adjustable in 3 stages.
6) Circular blade angle auto adjustment is controlled by SANYO step motor or MITSUBISHI servo motor which is used to calculate the circular blade angle and the angle change is subject to different raw materials ( the angle change range is ±8°for single shaft cutting and ±3° for double shafts and four shafts cutting). The cutting angle is changed directly when the cutting surface is not smooth, so the efficiency is improved.
7) Three kinds of shafts size are available, quick change of shafts are suitable for different raw materials.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc