Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
PVC electrical tape cutting machine for cutting BOPP, OPP, Cellophane tape, 3M, Mylar, Kapton, EVA,PE, PVC, Masking tape, Double-side adhesive tape, Kraft tape , Protective film, Duct tape , film roll etc. Auto Jumbo Roll Cutting Machine including the Semi-automatic roll cutting machine , single shaft roll cutting machine , double shaft roll cutting machine, YL-708 Fully Automatic 4 Shaft Tape Roll Cutting Machine.
For fully automatic roll cutting machine :
1. Machine with PLC control and color touch screen, easy and convenient to operate to worker,also improves the quality of the finished cut roll;
2. Can accoring to customer's requirments to set 10 differents cutting width and the angle of cutting.( if cutsomer needed maximum can reach 20 types);
3. with automatic spary silicone oil cooling system, thus the finished products with smooth and beautiful cutting surface;
4. Cutter with servo-motor control, apply for different material roll, also machine cutter move forward stablly and smoothly.
5. Cutter and the main shaft adpots AC motor. The high precision ball screw work with servo motor and he straight liner slide rail, machine running smoothly and cutting the material with high precision.
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
7. Round knife Angle adjustment system ( optional): The Mitsubishi servo motor control to calculate the circular knife Angle.According to different materials to do different angles change (adjustment range: + / -8 ° ) .If the cutting surface is not good, you can change the cutting Angle according.That will increase the production efficiency.
8. Automatic roll changing system (optional): The cylinder drive positioning gear to drive the active spline.Make sure the fast and accurate change of log roll but without stopping during cutting,
Save the loading and unloading time and increase the productivity.
9.Fast cutting shaft changing system (optional): 3 different size cutting shafts for optional.
You can cutting different size paper core log roll in the fast shaft changing device.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc