Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
1. Using ultrasonic cutting and edge treatment for melting, so smooth, no rough edges.
2. PLC touch-screen, automatic feed, the computer count, high precision, speed and adjust the length of simple and quick, efficient.
3. Widely been used in gifts belt, nylon belt strip, strip Ribbon, ribbon bar, such as chemical fiber cut straight knife, knife ramps, such as shape Dovetail
4. This machine can cut different shapes of the products, just need to change the cut knife. And also can cut Like:
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
4. Motor control system: The PLC programmable controller.You can set up various cutting size in the same log roll.Can be adjusted cutting size according to the set up cutting width and cutting roll quantity.
5. Cutting size positioning system: The Mitsubishi servo motor control.Make sure the high accuracy of the ball screw and the linear slide rail positioning in the cutting.
6. Feed positioning system: The Hydraulic motor / Mitsubishi servo motor to control the knife feeding.It can be anthropomorphized as a three-step feeding speed of the cutter.
Improve efficiency and get the best quality.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc