Cnc Plasma Cutting Machine

Cnc Plasma Cutting Machine

Tape Cutting Machine features:
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, the tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material

Cnc Plasma Cutting Machine

Servo Motor Automatic Adhesive Tape Cutting Machine:

Product Description

1. Introduction for Automatic adhesive tape cutting machine

1.1 Application: Bopp Tape, PVC Tape, Double Side Tape, Film and Paper

1.2 Working Width: 1.3m, 1.6m

1.3 Shafts Design: Single shaft, double shafts, four shafts etc.

1.4 Configuration: PLC control with Servo Motor

 

Cnc Plasma Cutting Machine

Aluminum Foil Tape/Kraft Paper Tape Double Sided Tape PET PVC OPP Slitting Rewinder Machine:

Usage:

The machine is suitable for slitting and rewinding various large roll materials,such as self-adhesive, paper,90goffset paper,PVC,plastic material,etc.

 

Main Characteristic:

1. The machine adopts two Servo motor control, automatic tension, center reeling way;

2. This machine adopts frequency control, to maintain smooth operation during acceleration

3.Auto counter meter, auto machine stop when had alarm.

4.The rewinding adopts A,B inflatable shaft,operate neatly and assemble conveniently.

5.The unwinding adopts ultrasonic wave correcting method.

6.The circular cutter with slitting slitter edge and automatic discharge device.

7,Air shaft automatic pneumatic loading structure.

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com