Nail Machine

Nail Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Nail Machine

The difference between the scope and model of the tape cutting machine

Protective film cutting machine TDA080-NMSR

Features:
It has the function of reducing the wrinkles and indentations generated by the roller on the protective film and the aluminum foil tape. Configure specially machined smooth rollers.
It has anti-static effect and can prevent the tape from adhering to the machine casing. Specialized heavy duty cutting machine for industrial use. Suitable for work of more than 8 hours a day.
A machine that uses metal parts and metal parts for maintenance and repair. Automatically transfer and cut automatically in a certain size. A grounding wire is required for the included 3-pin plug body.

Specifications:
Tape width: 13-80mm
Tape length setting range: 40-9999mm Maximum tape outer diameter: 230mm
Power supply: AC 100V 50/60Hz (117V, 230V is also available)

Nail Machine

Tape cutter model difference ---

The tape cutter GL-5000 can be used for a variety of inner diameter tapes, and can also be used with two rolls of tape at the same time, without any error. The premise is that the two tapes are similar in material and have the same length to be cut so that one machine can cut two tapes at the same time. With electronic control system, it can electronically control the cutting length and reduce the error.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com