Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
The relationship between the tape cutting machine and the tape -
3: To say whether the tape cutting machine can meet the needs of customers, there is no doubt that in answering, Hongjin can definitely pick a tape cutting machine and label stripping machine suitable for customers, and the series of products of Hongjin automation equipment brand. , a total of 12 models. Guolian's tape cutting machine is the narrowest and can cut 3mm adhesive tape, the widest can cut 100mm adhesive tape, and the common specifications of several adhesive paper are 72mm, 60mm, 50mm, 36mm, etc.; Guolian tape cutting machine The length that can be cut is in the range of 5-999 mm. Common lengths are 65m, 75m, 106m. In addition to meeting the cutting requirements, Guolian's tape cutters have both manual and automatic modes, memory functions, and can also cut various types of adhesive tape.
Tape cutter model difference ---
The tape cutter GL-3700 is a disc tape cutter that does not have any curling when cutting the tape. The tape is cut very neatly and tidyly; the tape cutter does not need to adjust the blade; there is a handle in the middle of the machine. It is used to adjust the length of the tape cutting. The closer the handle is to the disc, the shorter the length of the tape cutting. Conversely, the farther away, the longer the tape cutting length; the cut tape will be automatically pasted on the disc. It is convenient for staff to use.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc