Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
Semi-automatic cutting machine technical operation rules
1. Scope of application
The semi-automatic cutting machine is a device for cutting medium and low carbon steel by flame using oxygen-acetylene (medium and low pressure) as a heat source. The machine can cut the straight line, the circle and the arc and the left and right 45 degree groove.
2. Qualification requirements for operators
2.1 The operator of the machine must be trained in safety professional skills.
2.2 The operator must understand how the machine is used and can handle faults that occur during operation.
3. Mechanical requirements for the working environment
3.1 This machine should not be used and stored in high humidity and high corrosion environment.
3.2 It is not advisable to carry out open-air operations in rainy and snowy weather and windy weather. If necessary, cover measures should be adopted.
Guolian Machinery -- GL-5000 Tape Cutting Machine
The operation method of GL-5000 is different from that of disc tape cutter, because they are different types of tape cutters, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter GL-5000 has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc